Gear boxes

The P 100 reducer — worm one - stage reducer is applied when there is need of control with the subsequent change of torsion torque, and if necessary and angular speeds. It can be applied in work where it is required to control loading and whenever possible to maintain its increased level long time....

The reducer 1Ch 63 — belongs to the category of one - stage worm reducers, to be applied to the solution of wide range of standard tasks in this connection is universal reducer. It is capable to transfer permanent and alternating loads, at the same time not very well there is rotation of shaft in...

The P 80 reducer — worm one - stage reducer is applied when there is need of control with the subsequent change of torsion torque, and if necessary and angular speeds. It can be applied in work where it is required to control loading and whenever possible to maintain its increased level long time....

Application conditions: - loading a constant and a variable within nominal torque, one direction and reversive; - work long (to 24 h a day) or with periodic stops; - rotation of shaft in any party without preference, the frequency of rotation of an entrance shaft to 1500 rpm; - the atmosphere like...

Technical characteristics Parameters Standard size 1Ts2U 100 125 160 200 250           Nominal transfer numbers 8; 10; 12,5; 16; 20; 25; 31,5; 40 Nominal torque on vykhdny to a shaft, Nanometer 315 630 1250 2500 5000 The allowed radial console loading enclosed...

Horizontal double - reduction cylindrical speed reducers of RTsD represent the mechanisms intended for reduction of frequency rotation and increases in torsion torque. Units of the RTsD - 250, RTsD - 350, RTsD - 400 and RTsD - 400P types have all - machine - building application. The reducer of...

Reducers with the designation Ts2U K represent crankcase units which generally found the application in cargo lifting gears. Are intended for significant increase in torsion torque at simultaneous decrease in rotating speed of output shaft. The reducer of Ts2U K is intended for short - term,...

This type of knot belongs to universal drives which are used in various productive spheres. The reducer 1Ch2 160/80 is specially designed for reduction of speed of rotation of a secondary shaft. And also it increases torque to the required value and is capable to work in reverse mode. On climatic...

Reducers cylindrical horizontal two - level all - machine - building application of standard sizes 1Ts2U - 100, 1Ts2U - 125, 1Ts2U - 160, 1Ts2U - 200, 1Ts2U - 250 are intended for increase in torque and reduction of frequency of rotation. Application conditions: • loading constant...

Double - reduction cylindrical speed reducers of horizontal placement, are applied, as a rule, in the light and average industry. The RM series are used when it is necessary to increase torsion torque and to reduce rotating speed of any mechanism or machine.

The reducer 2Ch 80 — according to characteristics and execution is close to Ch80 reducer. It is capable to work smoothly in the conditions of arid and tropical climate. Its mechanisms are capable to maintain strong overloads quite long time, and work of shaft both in normal, and in reverse mode...

Reducers are crane cylindrical three - stage vertical. A 400 type. Among products of all - machine - building assignment delivered by us — A - 400 reducer on the importance costs on the advanced positions. The reducer which we represent to belong to vertically crane category. It can be used in...

Crane installations stand separate group among set of machines and units. They, as well as other equipment cannot do without reducers. The reducer of RK is intended for application in cranes and other hoisting devices, as well as in other mechanical equipment for reduction of rotational speed and...

Double - reduction crane speed reducers of the Ts2 type as a rule are used in drives of different cranes as there increased requirements to specific power capacity are applied.

Cylindrical double - reduction speed reducers gained huge popularity in the market of mechanisms and units thanks to the universality, reliability and durability. The reducer 1Ts2N which found broad application in drives of different mechanical units also belongs to such high - quality mechanisms....